Cavist 100 Manuel D'utilisation page 17

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
Troubleshooting
IMPORTANT: If your wine cooler appears not to be operating properly, before contacting the
Customer Care Department, please refer to the checklist below.
PROBLEM
Appliance
does
operate
Temperature inside the
appliance is too warm.
Temperature inside the
appliance is too cold
Vibration
Moisture is forming on
the
inside
of
appliance.
Moisture is forming on
the
outside
of
appliance.
ENVIRONMENT
CAUTION:
Do not dispose of this product as it has with other household products. There is a separation of this waste
product into communities, you will need to inform your local authorities about the places where you can return
this product. In fact, electrical and electronic products contain hazardous substances that have harmful effects
on the environment or human health and should be recycled. The symbol here indicates that electrical and electronic
equipment should be chosen carefully, a wheeled waste container is marked with a cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin - 77290 Mitry Mory - France
www.hkoenig.com - sav@hkoenig.com - contact@hkoenig.com - Tél: +33 1 64 67 00 01
not
Not plugged in.
The circuit breaker has tripped or the fuse has blown.
The temperature controls are set too warm. Set the temperature
controls to a cooler setting and allow several hours for the
temperature to stabilise.
The door is being kept open too long or is being opened too
frequently, which is allowing warm air to enter the appliance.
The door is not closed completely.
The door gasket is not sealing correctly.
The appliance has recently been disconnected from the mains supply;
it will take at least four hours for it to get down to temperature again.
The temperature controls are set too cold. Set the temperature
controls to a warmer setting and allow several hours for the
temperature to stabilise.
Check to ensure that the appliance is on a level surface.
The appliance is touching the back wall behind it. Reposition the
appliance and move it from the wall.
If vibration continues to occur, then turn off the appliance and unplug
it from your mains supply. Then contact the Customer Care
Department for assistance.
The door is slightly open.
the
The door is being kept open too long or is being opened too
frequently. Open the door less often.
The door is not sealed properly.
The door is slightly open, causing cold air from inside the appliance
the
to meet warm, moist air from the outside.
POSSIBLE CAUSE

Publicité

Table des Matières
loading

Table des Matières