Cavist 100 Manuel D'utilisation page 15

o Remove the two screws from the left door bottom and install them to the right door
bottom.
o Remove the right lower door hinge. And turn around 90°,
then install it at the designated position on the left side. And install the door shaft
assembly accordingly.
o Remove the upper hinge cover and remove the four screws that are used to fix the upper
hinge to the cabinet top.Then remove the upper hinge and install it at the designated
position on the left side.
o Set the glass door to the designated position and install the two lock screws to connect
the door shaft assembly with the glass door and tighten them before the door is levelled.
o Remove the handle from the left side of the door and install it on the right side.
IMPORTANT: Check that the door opens and shuts correctly, without fouling, after you have
completed the door reversal process.