Technical Data - RedMax LRT-EX110 Mode D'emploi

1. Use a grease gun to fill with grease.
Note: New products are first filled with grease after
approximately 20 hours of operation, and
subsequently approximately every 60 hours of
operation. Use special grease, no. 503 98 96-01.

Technical data

Weight
Weight, kg/lbs
Blades
Blade length, mm/inch
Speed, blade, rpm
Noise emissions
Sound power level, measured dB (A)
Sound power level, guaranteed L
1
Noise levels
Equivalent sound pressure level at the operator's ear, measured ac-
cording to EN15503 dB(A)
Equipped with approved accessory (original)
2
Vibration levels
Equivalent vibration levels (a
Equipped with approved accessory (original), left/right
1
Reported data for equivalent sound pressure level for the machine has a typical statistical dispersion (stand-
ard deviation) of 1 dB(A).
2
Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation) of 1 m/s
442 - 002 -
Technical data
dB (A)
WA
) at handles, measured according to EN ISO 22867,, m/s
hv,eq
The grease in the bevel gear does not normally need
to be changed except if repairs are carried out.
To clean and lubricate the cutter
1. Clean any resin and plant residue from the blades
using cleaning agent 531 00 75-13 (UL22) before
and after using the product.
2. Lubricate the blade bars with special grease, part no.
531 00 75-12 (UL 21) before long periods of storage.
LRT-EX110
0.9/2.0
550/21.7
4184
111
114
99
5.6/7.6
LRT-EX850
0.9/2.0
550/21.7
4184
110
113
98
2
5.7/7.5
2
.
9