Simons Voss Technologies SREL Guide Abrégé page 31

5. Maintenance
Guide the cables through the recess (white housing).
IMPORTANT
Danger of short circuit due to missing seal
The cable entry of the WP version is not sealed. Water can
enter.
Seal the cable entry yourself with a suitable sealant (e.g.

vinegar-free cross-linking silicone).
4. Reattach the circuit board.
5. If applicable: Connect accessories.
6. Connect the power supply.
7. Reattach the cover.
Assembly completed.
9
5. Maintenance
5.1. Battery warning and battery replacement
when SREL.BAT is used
A SmartRelay can emit a battery warning as follows when
the battery capacity is depleted:
SREL, SREL.ZK and SREL.ADV

Inside LED flashes 8x each time a transponder is

used and before the SmartRelay switches.
31 / 128 | EN