1. General safety instructions
surfaces.
NOTE
Intended use
SimonsVoss-products are designed exclusively for
opening and closing doors and similar objects.
Do not use SimonsVoss products for any other
purposes.
Malfunctions due to poor contact or different discharge
Contact surfaces that are too small/contaminated or differ-
ent discharged batteries can lead to malfunctions.
1.
Only use batteries that are approved by SimonsVoss.
2. Do not touch the contacts of the new batteries with your
hands.
3. Use clean and grease-free gloves.
4. Always replace all batteries at the same time.
Different times for G2 locks
The internal time unit of the G2 locks has a technical toler-
ance of up to ± 15 minutes per year.
Qualifications required
The installation and commissioning requires specialized
knowledge.
25 / 128 | EN