Keysight 53220A Mode D'emploi page 54

2 53220A/53230A Software Installation and Interface Configuration
Installing the Keysight IO Libraries
The Keysight IO Libraries include the VISA and VISA-COM libraries used for
programming the 53220A/53230A in Microsoft® development environments
(Table
the 53220A/53230A SCPI command set to the instrument. The IO libraries also
include Keysight Connection Expert described and used later in this chapter.
The Keysight IO Libraries (VISA and VISA-COM) must be installed prior to
NOTE
installing any other I/O drivers (e.g. IVI-C, IVI-COM).
The Keysight IO Libraries and utilities are often updated to include additional
NOTE
features and improve usability. The figures used in this chapter represent the
latest version of the IO Libraries available at the time of printing. While you may
have a different version, the process of configuring and adding instruments to an
interface remains basically the same.
The IO Libraries can be downloaded from the Electronic Test & Measurement
Software page at:
http://www.keysight.com
Before installing the IO libraries, review
meets the specifications required for the latest version of the software.
54
2-1). The VISA and VISA-COM libraries allow you to send commands from
Table 2-2 to verify that your computer
Keysight 53220A/53230A User's Guide