Keysight 53220A Mode D'emploi page 49

Using the Counter Web-Enabled Interface
Operating the 53220A/53230A counter from its Web interface requires a
Java™-enabled Web browser but no add itional (i.e. user-installed) libraries or
drivers. The Web interface provides access to the counter's SCPI command set.
This section describes the Web pages and windows primarily used to program
NOTE
the 53220A/53230A. Refer to "Help with this Page" associated with each Web
page for additional information on functions or pages not covered in this
manual.
Connecting the counter and viewing its home page
Connect the counter d irectly to the PC or to the PC through a network switch
using a standard LAN cable.
Obtaining the IP address
Turn on the counter and open the Web browser. Allow a few moments for the
counter's IP address to be assigned (either through DHCP or AUTO IP). The IP
address can be read from the counter front panel as shown.
Keysight 53220A/53230A User's Guide
53220A/53230A Software Installation and Interface Configuration 2
49