Qlima PES 7125 Manuel D'utilisation page 95

Condensation Removal
After the completion of cold storage or heat storage, if there is no other
operation, the condensation removal function will start automatically without
any other operation.
Drainage
In case of full water alarm and need to drain to the working water level or drain
the water in the water tank, please follow the steps below to drain the water in
the internal water tank of the machine.
(1) Unscrew the drain knob on the rear plate, tighten one end of the water inlet
/ drain pipe to the drain, and connect the other end to the drain such as the
water collecting container or floor drain.
(2) Insert the power plug into the power socket and press the on key on the
control panel.
(3) Press the [drainage] key, and press the drainage key for more than 3 seconds
according to the voice prompt, and the system will automatically start the
water pump for drainage.
(4) When the water level is above the working water level, the drainage will stop
only when it reaches the working water level. If it is necessary to drain the
water in the water tank, repeat step (3) to continue the drainage until it is
drained.
(5) After the completion of drainage, the drainage pump will automatically shut
down.
(6) Remove the water inlet / drain pipe and screw the drain knob cover.
D
APP USE
App Use
1. Download APP
Please download Tuya APP from the Internet.
2. Register
• Click "create new account" to enter the registration page
• The system will automatically determine the current country / region. You
can also select the country / region manually, enter the mobile phone
number or email, and click next.
• If you fill in the mobile number, fill in the verification code received by the
mobile phone, enter the password, and click "OK" to register successfully
• If you fill in the email address, enter the password on the page and click
"OK" to register successfully
Android Android IOS IOS
GB
95