Qlima PES 7125 Manuel D'utilisation page 94

Preset
Preset Setting:
(1) Press the [preset] key to enter the preset mode, and then select the cold
(2) Press the [preset] key to confirm cold storage preset or heat storage preset.
(3) Press [+] or [-] to select how many hours to use after the preset, and select the
Preset cancellation method:
(1) Press the [preset] key again, the previous preset will be cancelled, and a new
(2) After the power is off, the preset will be cancelled automatically.
(3) Press and hold the[preset] key for more than 3 seconds to cancel the preset.
Note: a. A few hours before the preset, the machine starts cold storage or
Timing
(1) When it is not in cooling, strong cooling, ventilation, heating or
(2) When it is in cooling, strong cooling, ventilation, heating or dehumidification
Child Lock
(1) Child lock setting: Press [+]and[-]at the same time as long as 3 seconds to
(2) Release of child lock: Press the [+]and [-]keys at the same time as long as 3
GB
94
storage preset and heat storage preset.
time interval between 4 hours and 24 hours. After selecting the time, press
the [preset] key again to confirm, and the voice prompts that the preset is
completed.
preset can be made at this time
heat storage. After the end of cold storage or heat storage, it will
automatically enter the standby insulation state.
b. Other operations can be carried out after the preset, and other
operation instructions take precedence over the preset setting. If other
operations end before the preset time, the preset will continue.
c. When using preset, please make sure the windows open for ventilation
dehumidification mode.
a Press [mode] key to select function, then press [Timing] to confirm
b Press [+] and [-] to select the start time, and then press [Timing] to confirm.
c Press [+] and [-] again to select the end time, and then press[Timing] to
confirm.
At the end of timing setting, there shall be a voice prompt.
mode:
a Press [+] and [-] to select the end time, and then press [Timing] to confirm.
b Press [Timing] to confirm.
At the end of timing setting, there shall be a voice prompt.
enter child lock status, when it is in child lock, other keys will be locked and
can not be operated.
seconds again or unplug the power plug to release the child lock status.