Connect Power Supply - Qlima PES 7125 Manuel D'utilisation

B

CONNECT POWER SUPPLY

1
2
WATER INFLOW
1
2
3
REPLACE THE WATER IN THE WATER TANK REGULARLY
GB
90
For the first use, please connect power supply, then refer to step 2 "water
inflow"
When it is not used for the first time or there is water in the water tank,
insert the power plug into the power socket and press the [power] key on the
control panel.
In case of water shortage alarm (no water in the water tank during the first
use or water shortage during use), please follow the steps below to feed
water into the water tank inside the machine.
Use inlet/outlet pipeline to connect this machine with faucet. Press the water
inlet key, and the faucet should be turned on at the same time.
When the water level reaches the specified height, the water inlet valve will
automatically close to complete the water inlet.
Remove the water inlet /outlet pipe and screw the water inlet knob cover.
It is recommended to replace the water in the water tank through drainage /
water inlet at least every quarter.