Ups Settings - LEGRAND DAKER DK Plus Manuel D'installation

4.6

UPS settings

After the UPS is turned on, it is possible to check the UPS settings by pressing
parameters can be scrolled pressing
It is possible to change only three parameters while the UPS is supplying the loads. One of these is
reserved to the LEGRAND Technical Support Service.
PARAMETER
BUZZER
QUICK
BATTERY TEST
BATTERY STATUS
TEST
This function
is reserved to
the LEGRAND
Technical Support
Service and must
not be activated
by the user
50
.
SETTING
ON
OFF
OFF
ON
OFF
ON
4 Operation
. The different
DISPLAY