Tools Required - R&G TH0002 Instructions De Montage

LEGEND
ITEM 1 = TIE-DOWN HOOK (SMW0059) (x1).
ITEM 2 = M8 x 30mm LONG COUNTERSUNK BOLT (x2).
ITEM 3 = SPACERS (S0623 – 6mm LONG) (x2).
ITEM 4 = SPACERS (S0940 – 6mm LONG TAPERED) (x2).
HANGER
ITEM 5 = M8 x 20mm LONG COUNTERSUNK BOLT (x2). (NOT SHOWN)
OF M8 x 30mm LONG COUNTERSUNK BOLTS
Please note that in cases where kits are packed with rubber washers holding the components onto the bolt
Picture 2
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
– the rubber washers should be thrown away!

TOOLS REQUIRED

•
Socket set to include 5 & 6mm socket and wrench and extensions.
•
Socket set to include 12mm socket (only for use on 959).
*TO BE USED ON 959 WHEN NOT USING EXHAUST
Picture 1
R&G Racing
www.rg-racing.com
*TO BE USED ON 899 ONLY IN PLACE
Picture 3
Email: info@rg-racing.com
TH0002