Recording Tv Programs; Connecting The Vcr And Tv - Sony SVO-1630 Mode D'emploi

Recording TV Programs

Connecting the VCR and TV

A Use this hookup if you're using:
SVO-1630
VHF/UHF OUT
B Use this hookup if you're using:
SVO-1630
VHF/UHF OUT
t l y d i r e c V C R t h e t o c a b l e
. S ) ( U
40
(US)
This section shows you how to record TV programs.
Before recording, connect the antenna and TV to the VCR and set up the
VCR's tuner.
• VHF/UHF antenna (you get channels 2-13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• separate VHF and UHF antennas
VHF/UHF IN
• a VHF-only antenna (you get channels 2-13 only)
• a cable TV system
VHF/UHF IN
a n t e n n a y o u r c o n n e c t c a n n o t y o u I f
If your antenna cable is a flat cable (300-ohm twin lead cable), attach the
external antenna connector (not supplied) so that you can connect the cable
to the VHF/UHF IN jack. If you have separate cables for VHF and UHF
4 1 g e p a antennas, you may use a U/V band mixer. F o e s e s ,
Rear of TV
VHF/UHF
or
VHF
UHF
or
VHF
Rear of TV
VHF/UHF
or
VHF
UHF
or
VHF
UHF
i l t a d e r
Match the type of
connector on your
A
TV: A, B, or C.
B
C
UHF
Match the type of
connector on your
A
TV: A, B, or C.
For connector types
B
B and C, no UHF
connection is
required.
C