Configuration; Default Ip Address; Web Interface; First Access To The Web - Stahl IC-930-AFZ Serie Manuel D'instructions

10 Configuration

10.1 Default IP address

The unit is configured to obtain an IP
address from a DHCP server.
The IP address acquired via DHCP is visible in the
DHCP server log file.
If the DHCP server is not available, the unit
automatically configures itself with a self-generated
IP address in the 169.254.x.x/16 subnet. Configuring
the IP address of the PC as belonging to the same
subnet (example: IP address: 169.254.1.1, subnet
mask: 255.255.0.0).
Use an ONVIF compliant VMS or a network sniffer to
find the IP address of the device (IP scan utility).

10.2 Web interface

Browsers supported (the latest version):
Microsoft Edge, Google Chrome, Mozilla
Firefox.
10.2.1 First access to the web pages
The first operation in configuring the device consists
in connecting to the web interface.
To access the web interface of the product, simply
use a browser to connect to http:/ ip_address.
On first access, the Home page will be displayed.
For the configuration of the web interface,
please refer to the instruction manual
relating to the installed firmware version,
available on the product web page on
www.r-stahl.com.
20

11 Accessories and Supports

For further details on configuration and
use, refer to the relative manual.

11.1 Washer

The product, if equipped with a wiper, can be
equipped with an external pump that provides water
to clean the glass.
Fig. 28
To complete installation of the washing system, use
the kit supplied with the camera.
Insert the head of the nozzle (01) on the support (02)
by tightening the nut (03).
01
Fig. 29
Fasten the nozzle and the support assembled by
using one of the accessory holes (01) on the front of
the housing. Tighten the screw and the washer (02).
Insert the delivery pipe of the nozzle (03). Secure the
delivery pipe to the support with a clip (04).
02
Fig. 30
02
03
01
03 04
MNTCNVX_1915_EN