Configuration; Default Ip Address; Web Interface; First Access To The Web - Stahl EC-940-PTZ-HF Série Manuel D'instructions

10 Configuration

10.1 Default IP address

The unit is configured to obtain an IP
address from a DHCP server.
The IP address acquired via DHCP is visible in the
DHCP server log file.
If the DHCP server is not available, the unit
automatically configures itself with a self-generated
IP address in the 169.254.x.x/16 subnet. Configuring
the IP address of the PC as belonging to the same
subnet (example: IP address: 169.254.1.1, subnet
mask: 255.255.0.0).
Use an ONVIF compatible VMS or a network sniffer to
find the IP address of the device (IP scan utility).

10.2 Web interface

Browsers supported: Microsoft Internet
Explorer, Microsoft Edge, Google Chrome,
Mozilla Firefox.
10.2.1 First access to the web pages
The first operation in configuring the device consists
in connecting to the web interface.
To access the web interface of the product, simply
use a browser to connect to http:/ ip_address.
On first access, the Home page will be displayed.
MNTCMPXHDB_1824_EN

10.2.2 Home Page

The product control interface is displayed if login is
successful.
The Home page displays the snapshot of the camera
and allows you to check the lenses and manage
movements.
Fig. 20

10.2.2.1 Video Snapshot

This area shows a preview of the video that the unit is
recording. The snapshot resolution and its frame-rate
are fixed and differ from the actual characteristics of
the video stream.
To view the video stream quality, it is necessary to use
a VMS or check the relative chapter (10.2.13 Encoder
Parameters page, page 33).
Fig. 21
25