Delivery And Transport - Tuxhorn tubra-nemux-S Instructions De Montage Et D'utilisation

1.4

Delivery and transport

Check to make sure the product is complete and undamaged immediately after receipt. Any
damage or complaints must be reported immediately.
Observe the labels on the packaging without fail! The fresh water station should only be
removed from its packaging at the place of installation.
L a y o u t – s c o p e o f d e l i v e r y
2
Item Designation
1 Wilo PARA 15/7 iPWM2
2 Heating return with integrated
Gravity brake
3 Plate heat exchanger, copper soldered
Plate heat exchanger, solid stainless steel
4 Control unit
5 PT 1000 buffer supply
6 Base plate
7 Manual vent valve
8 Heat insulating shell
9 Huba Sensor Typ 235 2-40 l/min
Mounting material set:
- Screws 8*70 DIN571
- Washer 8.4 DIN125
- Wall plug S10
KW Cold water
WW Hot water
HVL Heating flow
HRL Heating return
Equipment -Set tubra-nemux S/M ball valve-Set 908.19.20.00:
Shut-off set for stand-alone station, consisting of 3 ball valves for storage tank flow and
storage tank return, as well as for the HW connection. The cold water connection must be
equipped with the required safety fittings in accordance with DIN 1988.
908.19.08.00
Last updated 2022/03/15
Replacement part number
130.15.74.00.01
908.00.49.00.01
nemux S 908.00.47.00.01
nemux M 908.00.67.00.01
nemux S 908.00.57.00.01
nemux M 908.00.77.00.01
908.00.70.00.01
908.00.51.00.01
908.00.50.00.01
904.25.84.00.01
Assembly and operating guide (not shown)
- 4 -
GB