Motorola WAVE TLK 150 Mode D'emploi page 37

MN006371A01-AF
Area Talkgroup
Chapter 15
Area Talkgroup
When you enter a geographic area, you are able to view and hear the notifications for the talkgroup
area in that geofence.
The Area Talkgroup is added to the Area Talkgroup List in alphabetical order. Once you are added to
the Area Talkgroup List, your radio receives calls from both Area Talkgroup and the Talkgroup Channel
before you enter into the Area Talkgroup zone. You can use the Channel button to navigate through
the Talkgroup Channel List and into the Area Talkgroup List. The Channel Number is not displayed
when you are in Area Talkgroup.
When you are in the Area Talkgroup, your radio sounds the Voice Announcement, the green LED
blinks, and the display shows the talkgroup alias when you press and hold the Menu/OK button to join
the talkgroup. If you do not select the talkgroup during that time, the Area Talkgroup is placed at the
end of the channel list, you may need to manually select the talkgroup when desired.
When calling without selecting the Area Talkgroup, the current talkgroup receives the call.
When you exit the Area Talkgroup, your radio sounds the Voice Announcement and the display shows
the talkgroup alias as well. If you are in a call when you exit the Area Talkgroup, the call continues
without dropping. When the call finally terminates, your radio then exit the Area Talkgroup.
If the Area Talkgroup is removed, you will go back to your previous channel.
37