Publicité
Les langues disponibles
Les langues disponibles
Date: 5/29/19
5. Route the harness forward towards the
right of the radiator. Use a gold wire tie to
attach the block heater harness to the vehicle
harness above the tow hook. Harness has white
tape denoting location of gold wire tie to allow
for proper engine movements.
6.
Use a gold wire tie to attach the block
heater harness to the vehicle harness below the
radiator fan connector.
7. Attach the block heater harness to the
lower radiator support frame with the pre‐
installed harness clips at 4 locations.
Subaru Of America
Page 4 of 7
Publicité
