Install The Unit; Locating And Mounting The Unit; Tools And Materials; How To Hang The Unit - Broan-NuTone AE60 Guide D'installation Et D'utilisation

3.

INSTALL THE UNIT

3.1 L
OCATING AND
Choose an appropriate location for the unit, far from the areas of the house where peace
and quiet are desired.
• So as to provide easy access for filter maintenance (sometimes, by
installing the unit upside down, it becomes easier to get at the filter).
• Close to an exterior wall, so as to limit the length of the insulated flexible
ducts to and from the unit.
• Away from hot chimneys and other fire hazards.
• Allow for a power source (standard 3-prong grounding outlet).
3.2 T
OOLS AND
• Phillips screwdriver no. 2 or Robertson no. 2
• Scissors or utility knife (to cut duct tape and flexible ducts)
• Duct tape
• Jig saw
• A pair of metal shears (if the exterior covering of the house is aluminum
or vinyl)
• A chisel and hammer (if the exterior covering of the house is brick)
• Caulking gun and caulking
3.3 H
OW TO
Use the 4 chains and springs in the hardware pack provided with the unit. According to
your needs, the unit can be installed upside down.
Make sure the unit is level.
VD0156
M
OUNTING THE
M
ATERIALS
H U
ANG THE NIT
U
NIT
CAUTION
7