Typical Installations; Basement Installation; Attic Installation - Broan-NuTone AE60 Guide D'installation Et D'utilisation

2.

TYPICAL INSTALLATIONS

Use the following illustrations as guidelines to help you decide where your unit will be
installed. The unit should be hung to the joists, using chains and springs (included). If
needed, this unit can be installed upside down. For more details, see Point 3. INSTALL
THE UNIT .
In every case, bathroom fan and a range hood should be used to exhaust stale air. Also,
for homes with more than one level, we recommend one exhaust register at the highest
level.
NOTE: An electrical outlet (standard 3-prong grounding outlet) has to be available within
3 feet from the unit.
2.1 B
ASEMENT
Only one outside connection is needed when
using the Tandem® transition* and the dual
outside port*, simplifying the installation. These
two components are included in the installation
kit no. 15273 (purchase separately).
NOTES: 1. See Point 2.3 MOUNTING
CONSIDERATIONS on next page
for required joists opening.
2. The installation kit no. 15273 is not
available in the U.S.A.
*Patented.
2.2 A I
TTIC NSTALLATION
If the unit is installed in the attic, this unit must
always be in operation during the winter season.
Use the installation kit no. EA20130 (purchase
separately).
NOTE: The installation kit no. EA20130 is not
available in the U.S.A.
I
NSTALLATION
VH0053
VH0004
5