Broan-NuTone AE60 Guide D'installation Et D'utilisation page 13

3. INSTALL THE UNIT
3.7 E
XTERIOR
3.7.1 T
ANDEM
The dual exterior hood must be installed at a minimum
distance of 18 inches (457 mm) from the ground.
See illustration beside.
Make sure this hood is at least 6 feet (1.8 m) away (or more, as per applicable
building codes or standards) from sources of contamination such as:
• High efficiency furnace vent
• Any exhaust from a combustion source
• Gas meter exhaust, gas barbecue-grill
• Garbage bin
1. Using a jig saw, cut a 6'' diameter hole
in the exterior wall and insert the
Tandem transition through this hole.
The Tandem transition must be inserted in such a way that the exhaust air
to outside duct will be located on the top.
O (
PENING S
T
RANSITION WITH
(CONT'D)
) I
NSTALLATION
D E
UAL XTERIOR
WARNING
!
VD0084
1) Exhaust air to outside duct
CAUTION
13
( ' )
CONT D
H
( ' )
OOD
CONT D
VD0083A
18"
(457 mm)
1