Broan-NuTone AE60 Guide D'installation Et D'utilisation page 14

3. INSTALL THE UNIT
3.7 E
XTERIOR
3.7.1 T
ANDEM
2. Join the end of the Tandem transition to
the rear of the exterior backplate.
Secure with 2 Xmas tree pins and seal
properly with duct tape.
The exterior backplate must be installed with the word "TOP" pointing
upward.
3. Lean the exterior backplate to the exterior
wall. Using 4 no. 8 x 1½" screws, fix it to
the wall. Seal the outline with caulking.
4. Snap the assembled exterior hood on its
backplate and secure with 2 provided
screws (no. 8 x 3/4" long).
O ( ) I
PENING S
T
RANSITION WITH
(CONT'D)
NSTALLATION
D E H
UAL XTERIOR
VD0085
CAUTION
14
( ' )
CONT D
( ' )
OOD
CONT D
VD0086
VD0087
Xmas tree pin
screw