Filter - Festool CT 36 E AC Guide D'utilisation

WARNING
Risk of injury

During the following procedure, take care not to
raise dust more than is unavoidable. Moisten the
main filter with a water spray before removing it.
Changing the filter bag
Inserting the filter bag

Open the locking clips [2-2] and remove the top
section of the machine [2-1].

Insert a new filter bag (SC-FIS-CT 26/36/48)
(Fig. [5]) in the inlet port of the dust container
and interlock it. Important: be aware that the
locking engages.
 Make sure that the filter bag is not pinched be-
tween the top and bottom sections.

Replace the top section [2-1] and close the
locking clips [2-2].
SC-FIS-CT 26/36/48
2
5
1
3

Filter

Removing the filter bag

Open the locking clips [2-2] and remove the top
section of the machine [2-1].
2
6

Remove the filter bag (Fig. [6]).

Dispose of the used bag in accordance with stat-
utory regulations.

Clean the dust container [2-3].

Insert a new filter bag if necessary (see Insert-
ing the filter bag).

Replace the top section [2-1] and close the
locking clips [2-2].
Changing the disposal bag
Inserting the disposal bag [7]

Open the locking clips [2-2] and remove the top
section of the machine [2-1].

Insert a new disposal bag (ENS-CT26/36/48) on
the inlet nozzle of the container and lock in po-
sition.
Important: The lateral openings on the disposal
bag must be positioned inside the container.
Make sure that the bolt engages.

Place the disposal bag over the edge of the con-
tainer.
Make sure that the contacts [7-1] are free.

Replace the top section [2-1] and close the
1
1
3
3
13