Alcad 912 Serie Manuel page 33

Next the programmer will request a name for the module, by which it will be identifi ed in the confi guration
fi le. When the confi guration of a module is saved, the programmer automatically saves the series to
which the module belongs.
So far, the confi guration fi le that has been generated has only one module. To add more modules to the fi le,
press the MENU key on the programming window and once again select the option Save confi guration.
Select the same fi le path where you generated the .cfi fi le and select the same fi le. Previously saved modules
will now be shown, along with the numeric identifi ers you generated. Give an identifying number to the
new module you are going to add to the list.
When you confi rm with the OK key, a message will appear on the screen telling you that the module has
been added correctly.
If you do not have a USB memory stick or SD card connected, the programmer will automatically save the
information in the internal memory of the PS-011.
9.3. How to load the confi gurations saved in memory
To load confi gurations saved in a .cfi fi le and stored either in the internal memory of the programmer or
externally on a USB stick or SD card, press the MENU key on the programming screen of the module you
wish to program. Select the option Load confi guration. Next browse through memory until you locate the
confi guration fi le you need. Only confi guration fi les that are stored in memory will be presented on the
screen.
Select the saved confi guration fi le (with extension .cfi ) which you want to load into the module, and then
select the module. When the module of the installation which you wish to load has been selected, you will
see that on the programming screen all the fi elds have been completed with the data of the module whose
confi guration had been saved.
To send all this information to the module, press the COPY key.
PS-011 MANUAL
PS-011 MANUAL
61%
Hotel installation equipment 1 .cfi
61%
1
2
23-3-2011 11:15:38
Installations
USB/
New file
23-3-2011 11:18:15
Installations
USB/
Module name
912TT
912TT
PAG. 33
ENG