Alcad 912 Serie Manuel page 24

3.2. Handling the PS-011. Basic Functions of the PS-011.
On/off: the PS-011 programmer is turned both on and off by pressing the key
turned off from any of its screens. When the programmer is turned off, the screen automatically becomes
blank. It is important to know that if the remote control is turned off during the programming of a device
and then immediately turned on again, it does not restart at the point it was at when turned off, but rather
reverts to the main menu.
Located in the top part of the keypad are the menu, read, Copy and T function keys.
menu:
read:
copy:
T:
The cursor keys
software, are described below.
:
:
OK:
ESC:
The alphanumeric keypad is used to enter numbers and letters. Pressing a key once enters the corresponding
number on the screen. By pressing it again repeatedly, the letters which appear under the number are
entered.
Alphanumeric keypad
PS-011 MANUAL
PS-011 MANUAL
reveals the options available within the various screens.
allows you to read the data saved in the modules to be programmed.
is used for the transmission of the data of the module.
transmits the information from the programmer to the equipment shown in the fi eld
selected on the screen.
, OK y ESC, used for navigating through the menus of the programmer
,
cursor keys used for moving around within a screen.
used for erasing any characters entered by mistake.
this key is used whenever you wish to select an option or validate a value you
have entered.
allows you to exit from the lists of options or to go backwards through the screens
of the programming environment.
menu
Function keys
ESC
read copy
T
OK
1 2 3
abc def
4 5
6
ghi jkl mno
7 8 9
pqrs tuv
wxyz
0
.
PAG. 24
once. . It can also be
Cursor keys
On/off key
ENG