Alcad 912 Serie Manuel page 30

To keep the list of series which can be programmed up to date, series can be added and deleted.
7.1. Loading Series
In order to load a new series:
1. Download the fi le for the series which you wish to add from our website (www.alcad.net).
2. Copy the .so fi le to an SD card or to a USB memory stick.
3. Insert the SD card or USB stick into the PS-011.
4. In the Main menu, select Confi gure PS programmer and then Load series.
5. Select the product line which you wish to load onto the programmer and confi rm with OK.
Once the series has been loaded, it will be available in the menu under the option Select series.
7.2. Deleting Series
If, on the other hand, you wish to delete any of the series that are loaded in your programmer, select
Confi gure PS programmer in the main menu; then, within this option, select Delete series. Choose those
series that you want to delete and confi rm with OK.
8. PROGRAMMING OF DEVICES
To access the menu for programming devices using the PS-011, choose the option Select series from
the Main menu; next, among the series which you have loaded on your programmer, choose the one
corresponding to the device you wish to confi gure. Finally, select Confi gure module.
Bear in mind that in each family of products, the data requested for programming purposes will be
different, and that consequently the graphic interface will vary, depending on these data.
92%
912-TT Transmodulator QPSK-COFDM
Input
Off
Power LNB
Input frequency
950
Symbol rate QPSK
Auto
FEC QPSK
Input level
BER
Output
DVB-T
Standard
Program by Channel
PS-011 MANUAL
PS-011 MANUAL
13-3-2011 10:22:32
Auto 1000
<40
8.99E-09
Program by
Standard
MHz Channel
KBd
Frequency
dBuV
V/A ratio
Audio
Audio level
Video level
PAG. 30
93%
912-MS Modulators
Channel
BGCCIR
2
50.50
12 dB
Mono
1
1
15-3-2011 10:12:23
MHz
dB
dB
ENG