Replacing The Sanding Pad [5]; Changing The Sanding Discs [6]; Sanding Close To Edges [7] - Festool PLANEX easy LHS-E 225 EQ Guide D'utilisation

Replacing the sanding pad [5]

5
Observe the following instructions:
– An optimal work result can only be achieved us-
ing original accessories and consumables. The
use of non-original accessories or consumables
invalidates the right to claim under warranty.
– Only fit and remove the sanding pads using the
tool supplied.
– Make sure that both flat edges engage in the
opening on the sanding pad.
Changing the sanding discs
Compatible StickFix sanding discs are quick and
easy to attach to the StickFix sanding pad.
CAUTION! The holes in the sanding disc
must be aligned with the holes in the sand-
ing pad. Otherwise, the suction power is im-
paired and there is more exposure to dust.
Do not use interface pads.
6
Sanding close to edges
The removable brush segment means that the dis-
tance at the side between the wall/ceiling and the
sanding pad is reduced.
CAUTION! Without a brush segment, there
is more exposure to dust: Only remove it for
specific applications.
The brush segment is fitted in reverse order to the
process for removing it.
[6]
[7]
13