Replace Sanding Pad And Sanding Pad Brake; Accessories; Eu Declaration Of Conformity - Festool ETS EC 150/3 EQ Notice D'utilisation D'origine

9.3 Replace sanding pad and sanding pad
brake
The rubber sleeve[4-2] brushes off the sanding pad
and prevents uncontrolled turning of the sanding
pad. The sanding pad brake is almost wear-free
thanks to the pins used.
In the case of a decreasing braking effect, first
check the sanding pad for wear and replace it if
necessary. Replace damaged sanding pad brake/
rubber sleeve.
10

Accessories

Only use original Festool sanding and polishing
pads. Low-quality sanding and polishing pads may
cause serious machine imbalance that decreases
the quality of the working results and increases
machine wear.
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festool.com".
11 Environment
Do not dispose of electric power tools in house-
hold waste! Recycle devices, accessories and
packaging. Observe applicable country-specific
regulations.
EU only: In accordance with European Directive on
waste electrical and electronic equipment and im-
plementation in national law, used electric power
tools must be collected separately and handed in
for environmentally friendly recycling.
Information on REACh: www.festool.com/reach
12

EU Declaration of Conformity

Eccentric sander
ETS EC 150/3 EQ
ETS EC 150/5 EQ
Year of CE mark: 2014
We declare under sole responsibility that this prod-
uct complies with all the relevant requirements in
the following Directives, standards and normative
documents:
2006/42/EG, 2004/108/EG, 2011/65/EU, EN 60745-
1, EN 60745-2-4, EN 55014-1, EN 55014-2, EN
61000-3-2, EN 61000-3-3.
Festool GmbH
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Johannes Steimel
Head of Research, Development and Technical
Documentation
2014-05-12
ETS EC 150
GB
Serial no.
500069
10006674
15