Proper Use; Device Description - ALFRA TML 1000 Mode D'emploi

Table des Matières

Les langues disponibles

PROPER USE

The permanent lifting magnet TML 1000 is designed to lift ferromagnetic, metallic loads and may only be

used according to its technical data and determination. Proper use also includes adherence to the

start-up, operating, environment and maintenance conditions specified by the manufacturer. Proper use

and maintenance of the lifting magnet are the responsibility of the user. It is also his responsibility to

understand the Operation Instructions.

The TML (Thin Material Lifter) is a switchable lifting magnet with manual actuation for the lifting, transporting

and lowering of ferromagnetic materials. By pressing the lever (F) down, the magnetic field generated by the

permanent magnet can be activated in the lower magnetic plate (C) area.

Thanks to the special design, a very compact magnetic field is generated which develops excellent adhesive

force, especially on thin materials (less than 10 mm). The magnet can be deactivated by first pressing the

safety tab (E) with the heel of the hand and then moving the lever upwards. An adjustable oil damper (G) is

incorporated underneath the safety tab in order to absorb the recoil energy of the lever, especially during

use on thin materials. Additional threads for mounting (H) are located on either front side of the magnet

which, if desired, can be used as holding device. An eyelet (A) is situated on the top of the lifting magnet for

attachment to a crane. The load-bearing capacity of the lifting magnet is equivalent to 1/3 of the maximum

breakaway force of the magnet and thus is equivalent to the standard safety factor 3:1.

A) Load hook

B) Basic body

C) Magnetic contact area

D) Center of the magnet

E) Safety tab

F) Lever for activation/

deactivation

G) Shock absorber for lever

H) Additional threads

for mounting

Table des Matières