Proper Use; Device Description - ALFRA TML 400R Mode D'emploi

Proper Use

The permanent lifting magnet TML 400R is designed to lift ferromagnetic, metallic loads and may only be used
according to its technical data and determination. Proper use includes adherence to the start-up, operating,
environment and maintenance conditions specified by the manufacturer. The user bears sole responsibility for
understanding the operating manual as well as for proper use and maintenance of the lifting magnet.

Device Description

The TML 400R (Thin Material Lifter) is a switchable lifting magnet with manual actuation for the lifting, transporting
and lowering of ferromagnetic materials. By pressing the lever (F) down, the magnetic field generated by the
permanent magnet can be activated in the lower magnetic plate (C) area.
Thanks to the special design, a very compact magnetic field is generated which develops excellent adhesive force,
especially on thin materials (less than 10 mm). The magnet can be deactivated by first pressing the safety tab (E)
with the heel of the hand and then moving the lever upwards. An adjustable oil damper is incorporated underneath
the safety tab in order to absorb the recoil energy of the lever, especially during use on thin materials. Additional
threads for mounting are located on either front side of the magnet which, if desired, can be used as holding
device. An eyelet is situated on the top of the lifting magnet for attachment to a crane. The load-bearing capacity of
the lifting magnet is equivalent to 1/3 of the maximum breakaway force of the magnet and thus is equivalent to the
standard safety factor 3:1. A groove in the magnetic contact area (I) allows also for the lifting of round pipes.
16
A) Load hook
B) Basic body
C) Magnetic contact area
D) Magnetic center of the magnet
E) Safety tab
F) Lever for activation / deactivation
G) Shock absorber for lever
H) Additional threads for mounting
I) Groove for round pipes