Proper Use; Device Description - ALFRA TMC 300 Mode D'emploi

Proper use

The TMC 300 is a switchable magnetic clamp equipped with permanent magnets which is designed for attachment
to ferromagnetic, metallic work pieces. It may only be used according to its technical data and determination.
Proper use includes adherence to the start-up, operating, environment and maintenance conditions specified by
the manufacturer. The user bears sole responsibility for understanding the operating manual as well as for proper
use and maintenance of the magnetic clamp.

Device description

The TMC (Thin Material Clamper) is a switchable magnetic clamp with manual actuation designed for attachment
to ferromagnetic materials. The magnet can be activated by pushing the activation lever (A) into the ON position
until it audibly latches into place. The installed permanent magnet (B) generates a magnetic field in the lower
magnetic plate area (D). Owing to the special design of the TMC 300, this magnetic field is very compact and
develops excellent adhesive force especially on thin materials of less than 10 mm. The activation lever must be
lifted slightly at its end and returned by 60° into the OFF position in order to deactivate the magnet. Care must be
taken that the lever springs back strongly when working on thin materials.
Multiple threaded holes (C) which can be used individually are located on three sides of the magnetic clamp.
Be sure to read the operation instructions completely before using the magnet for the first time!
12
A) Activation lever
B) Aluminium housing
C) Threaded holes for attachment
D) Magnetic surface