Technical Data, Markings - ALFRA TML 1000 Mode D'emploi

TECHNICAL DATA
Prod.-No.
Designation
Breakaway force
Max. load-bearing capacity:
(on flat material
with safety factor 3:1)
Max. load-bearing capacity:
(at 6° inclination acc. to EN 13155
with safety factor 3:1)
Max. load-bearing capacity:
(at 90° inclination of the load
with safety factor 3:1)
Dead weight of the magnet
Storage temperature
Operating temperature
MARKINGS ON THE LIFTING MAGNET
Additional detailed descriptions for handling and operating conditions can be found on both sides of the
lifting magnet. This labeling must not be modified, damaged or removed, as otherwise the manufacturer
cannot be held responsible for any personal injuries, property damage or accidents resulting from this fact.
New labels must be ordered from the manufacturer if necessary.
41700
TML 1000 Lifting magnet
>3400 kg from 12 mm S235
1000 kg from 12 mm S235
800 kg from 12 mm S235
300 kg from 12 mm S235
17.9 kg
-30°C to +60°C
-10°C to +60°C
>7480 lbs from 1⁄2" AISI CRS 1020
2200 lbs from 1⁄2" AISI CRS 1020
1760 lbs from 1⁄2" AISI CRS 1020
660 lbs from 1⁄2" AISI CRS 1020
39.4 lbs
-22°F to +140°F
+14°F to +140°F
15