Troubleshooting Guide; Troubleshooting - Stihl BGA 45 Notice D'emploi

English

22 Troubleshooting Guide

22.1 Troubleshooting

Always remove the activation key before carrying out any inspection, cleaning or maintenance.
Condition LEDs on the
blower
3 LEDs flash
red.
Blower does not start
when switched on.
1 LED flashes
green.
3 LEDs glow
red.
Blower cuts out 3 LEDs glow
during operation. red.
Runtime is too short.
Blower is not being 3 LEDs glow
charged. red.
24
Cause Remedy
Malfunction in ► Do not attempt to use. The blower has a malfunction and
blower. must be checked by a servicing dealer.
Activation key not ► Remove the activation key, @ 13.2.
fully inserted.
► Visually check the electrical contacts of the activation key.
► Reinsert the activation key, @ 13.1.
Less than 20 % ► Charge the blower, @ 10.
charge remaining.
Integrated battery ► Remove the activation key, @ 13.2.
too hot.
► Allow the blower to cool down gradually at ambient
temperatures of about 50 °F to 68 °F (10 °C to 20 °C).
Moisture in blower. ► Allow the blower to dry.
Integrated battery ► Remove the activation key, @ 13.2.
too hot.
► Allow the blower to cool down gradually at ambient
temperatures of about 50 °F to 68 °F (10 °C to 20 °C).
Electrical ► Switch off the blower. Wait at least 5 seconds and switch it
malfunction. back on, @ 14.
Blower not fully ► Charge the blower, @ 10.
charged.
Useful life of ► Have the blower checked by an authorized STIHL servicing
integrated battery dealer.
has been reached or
exceeded.
Integrated battery ► Allow the blower to warm up or cool down gradually at
too hot / too cold. ambient temperatures of about 50 °F to 68 °F (10 °C to
20 °C).
Integrated battery ► Allow the blower to warm up or cool down gradually at
too hot / too cold. ambient temperatures of about 50 °F to 68 °F (10 °C to
20 °C).
► Operate the charger only in enclosed, dry rooms at ambient
temperatures of 32 °F to 104 °F (0 °C to 40 °C).
22 Troubleshooting Guide
0458-719-8221-A