All-Frame Erase; Formatting Cards - Olympus CamediaD-390 Mode D'emploi

All-frame erase

This function erases all the pictures on the card.
1
In the playback mode top menu, select MODE MENU T CARD T
CARD SETUP, and press
2
Ññ
Press to select
3
Ññ
Press to select YES, then press
• All the pictures are erased. Protected pictures are not erased.
Formatting cards (Card setup)
This function lets you format a card. Formatting prepares cards to receive
data. Before using non-Olympus cards or cards which have been formatted
on a PC, you must format the card with this camera.
All existing data, including protected pictures, are erased when the
card is formatted. Make sure that you save or transfer important data
to a PC before formatting a used card.
1
In the top menu, select MODE MENU T CARD T CARD SETUP,
í
and press .
• Shooting mode: The
• Playback mode: The CARD SETUP screen is displayed.
2
If the FORMAT screen is displayed, press
If the CARD SETUP screen is displayed, press
FORMAT, then press
When the FORMAT screen appears, press
3
Press .
• The BUSY bar is displayed and the card is formatted.
í
.
ALL ERASE, then press
FORMAT screen is displayed.
.
Playback
.
.
Ññ
to select YES.
Ññ
to select
Ññ
to select YES.
En
29