Loading Batteries - Olympus CamediaD-390 Mode D'emploi

Getting started

Loading batteries

En
Use one CR-V3 lithium battery pack, or two AA (R6) NiMH batteries or
alkaline batteries.
Important
• CR-V3 lithium battery packs cannot be re-charged.
• Do not peel the label on a CR-V3 lithium battery pack.
• Manganese (zinc-carbon) batteries cannot be used.
1
Make sure that:
• The lens barrier is closed.
• The monitor is off.
• The lamps on the right of the viewfinder are off.
2
Slide the battery compartment cover in
the direction of
indicated by the
and lift it up in the direction of
3
Insert batteries in the direction shown in the illustration.
When using AA (R6) batteries
4
Close the battery compartment cover so
that it pushes batteries down inside.
While pressing the
cover in the direction of
• If the battery compartment cover seems hard to
close, do not force it. With the battery
compartment cover shut, press the
firmly and push in the direction shown in the
illustration.
10
a
(the direction
mark on the cover),
b
There is a mark on the bottom
of the camera showing the
correct way to insert batteries.
mark, slide the
c
.
b
.
When using a CR-V3 lithium battery pack
mark
a
c