All-Frame Erase; Formatting (Card Setup) - Olympus CAMEDIA C-5000ZOOM Manuel De Base

basic_e_x193_6.fm Page 36 Thursday, August 7, 2003 3:23 PM

All-frame erase

1
In the top menu, select MODE MENU
SETUP, and press d.
2
Press ac to select R ALL ERASE, then press e.
3
Press a to select YES, then press e.
• All the pictures are erased.

FORMATTING (CARD SETUP)

This function lets you format a card. Formatting prepares cards to receive
data. Before using non-Olympus cards or cards which have been formatted
on a PC, you must format them with this camera.
• All existing data, including protected data, is erased when the card
is formatted. Once erased, pictures cannot be restored, so make
En
Note
sure that you do not erase important image data. Download
important image data to a PC before formatting the card.
1
In all modes except h, press e to go to the top menu,
select MODE MENU
d.
• The I FORMAT screen is displayed.
When h is selected:
In the top menu, press d to select CARD SETUP.
2
Press a to select YES, then press e.
• The busy bar is displayed and the card is formatted.
36 En
CARD
CARD CARD SETUP, and press
CARD