RedMax HTZ2401 Mode D'emploi page 34

Masquer les pouces Voir aussi pour HTZ2401:
Table des Matières

Publicité

MA1
MA2
MA3
.025 in
0.655mm
34
(1)
(1)
English
8. Maintenance
WARNING
• Make sure that the engine has stopped and is
cool before performing any service to the
machine. Contact with moving cutting head or
hot muffler may result in a personal injury.
AIR FILTER
• The air filter, if clogged, will reduce the engine
performance. Check and clean the filter element in
warm, soapy water as required. Dry completely
before installing. If the element is broken or shrunk,
replace with a new one. (MA1)
(1) air filter
FUEL FILTER
• When the engine runs short of fuel supply, check the
fuel cap and the fuel filter for blockage. (MA2)
(1) fuel filter
SPARK PLUG
• Starting failure and mis-firing are often caused by a
fouled spark plug. Clean the spark plug and check
that the plug gap is in the correct range. For a
replacement plug, use the correct type specified by
RedMax. (MA3)
• REPLACEMENT PLUG IS NGK CMR7H OR
CHAMPION RZ7C.
IMPORTANT
• Note that using any spark plug other than those
designated may result in the engine failing to operate
properly or in the engine becoming overheated and
damaged.
• To install the spark plug, first turn the plug until it is
finger tight, then tighten it a quarter turn more with a
socket wrench.
TIGHTENING TORQUE:
MUFFLER
WARNING
• Inspect periodically, the muffler for loose fasteners,
any damage or corrosion. If any sign of exhaust
87~121 in-lbs
(9.8~13.7 N.m.)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Htz2401lChtz2401Chtz2401l

Table des Matières