Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation and Maintenance Instructions
Safety Message to Maintenance Personnel
Listed below are some important safety instructions and precautions
you should follow:
•
Read and understand all instructions before operating this system.
•
Any maintenance to the light system must be performed by a
trained electrician who is thoroughly familiar with all applicable
national and local codes in the country of use.
•
Any maintenance to the light system must be done with power
turned off.
•
EXPLOSION HAZARD: Substitution of any component may
impair suitability for Class 1, Division 2.
•
EXPLOSION HAZARD: Do not disconnect the light while the
circuit is live or unless the area is known to be free of ignitable
concentrations.
•
Do not connect this light to the system when power is on.
•
Keep the light closed when in operation.
•
Do not alter the light in any way. In hazardous areas, safety may
be compromised if additional openings or other alterations in units
specifically designed for use in these locations are made.
•
The nameplate should NOT be obscured, as it contains cautionary
and/or other information of importance to maintenance personnel.
Ensure the nameplate remains readable if the housing exterior is
painted.
•
If the dome is damaged in any way, it MUST be replaced.
•
After performing any maintenance, test the light system to ensure
that it is operating properly.
Failure to follow all safety precautions and instructions may result in
property damage, serious injury, or death.
Electraray
10
Models 224XST, 225XST, and 225XST-I
®
Publicité
Table des Matières
