Product Certification - Arregui TITAN 12000-S1 Mode D'emploi

Arregui B.S.S. S.L. certifies that the Titan family safe, with the references indicated on the table below, has
been tested at the LGAI Technological Center S.A., that the results are listed in the test report 11/3952 M1
and 12/3952-752, and that it has been Grade III classified according to UNE EN 1143-1:2007+A1:2010.
The delivered models have been manufactured according to the tested sample specifications.
FAMILY REFERENCE
12000-S1 (N01)
TITAN 12100-S1 (N01)
12300-S1 (N01)
KEYS
The «key» type models 12000-S1 and 12100-S1 possess a lock which is certified according to the norm
EN1300 type B, the certification of the same can be found in the attached documentation. The keys are
delivered with 2 copies, whenever you wish another copy; you shall request a rough key and carry out the copy
from your original key by a qualified locksmith.
We recommend keeping your keys in a secured place, never inside the safe
ELECTRONIC
The «Electronic» type models 12000-S1 and 12300-S1 possess a certified electronic lock according to the
norm EN1300 type B, an instruction manual is delivered with the attached documentation.
MAINTENANCE
We recommend cleaning the safe periodically with a slightly damped cloth, as well as a minimum lubrication of
the mobile pieces, that is the lock and the hinges, using a specific lubricant in each case.

PRODUCT CERTIFICATION

DESCRIPTION
Electronic + key
Grade III safe Key + handle
Electronic+handle
Serial Nº
TYPE DIMENSIONS
400x300x300
mm
<EN>
WEIGHT VOLUME
106Kg 10.5L