Guarantee Certificate; Important - Arregui TITAN 12000-S1 Mode D'emploi

• Enter the main code and the 2 digits delay values (from 00 up to 99 minutes), as well as the two digits
opening slot (from 00 up to 19 minutes). The safe will send out a double beep.
• Enter again the delay and opening slot values. Whenever the operation has been correctly carried out, you
will hear 2 beeps. In the contrary, a long beep will warn you that the operation is not correct. Repeat the
operation.
• To cancel the opening delay, enter 00 as delay value and 01 as opening slot value when the system is on
opening slot mode.
C. OPENING AND CLOSING THE TITAN SAFE with double bit tumbler lock
( Ref. 12100-S1)
C.1. OPENING
• Insert the key into the key hole, and turn clockwise to open the safe.
• Turn the lever downward and pull it to open the door.
C.2. CLOSING
• Push the door, turn the lever upward and turn the key counterclockwise.

GUARANTEE CERTIFICATE

The safe is guaranteed for a period of 24 months from the date of its purchase, as established by the Law
23/2003 dated July 10th on Guarantees in the Sale of Consumer Goods.
ABSS accepts the responsibility for lacks of approval declared within a period of two years in the event of
any manufacturing fault which affects the functioning of the safe from the date of its delivery, according to
the law. As from the first 12 months, the buyer must prove that the non-conformity already existed at the
moment he received the safe.
The faults produced as a result of an improper use or installation, an excess of humidity or salinity, water or
cement filtrations, force, the handling of the devices by non-authorized persons, disasters, impacts and falls
are excluded from the guarantee.
The repair or substitution of any part due to a fault implies a 6-month extension to the guarantee of the part
repaired or substituted. ABSS will accept the responsibility for the non-conformities that caused this repair
when the same factory faults that caused the first repair are repeated.
Identification data
Distributor's name ............................................................................ Date of sale ...............................................................................
Buyer's name ...................................................................................... Buyer's address ........................................................................
Identification data of the safe
Model ............................................................................................................. Serial number ..............................................................

IMPORTANT:

1). These data must be filled out as clearly as possible and without delay by the distri¬butor, who will put the
signature and stamp of his company in the place indicated. 2). The certificate will be kept by the buyer. 3). The
buyer must keep the PURCHASE INVOICE of the safe, along with the Guaran-tee Certificate, to be able to prove
the date of purchase. Both documents are necessary for the Guarantee to be effective.
<EN>