Troubleshooting - Trotec VE 4 S MultiQube Mode D'emploi

07. trOuBlEsHOOtIng

Too little or no air is being drawn off
• Check the hoses to see if they are blocked.
• Check the suction grille in the air ducts to see if they
are clean (coarse particle contamination).
• Check the water separator intakes for contamination.
• Check the demister in the waster separator.
• Check the microfilters.
• Check the HEPA filter intake ducts.
HEPA filter does not appear to be filtering
• Check the HEPA filter insert for damage.
m
repair work should only be carried out
by members of trotec staff. the guaran-
tee expires with immediate effect when repair
work is carried out by a third party. In such
cases, we no longer accept any liability for the
product. For this reason, we recommend that
you keep the original packaging for the duration
of the guarantee period. We do not accept any
responsibility for transport costs.
the machines are intended for commercial use
only.
the machines may only be operated by per-
sonnel who have been instructed in the correct
use of the machines and who have undergone
training in restorative technology. the user gui-
de should be consulted if necessary. Instructed
personnel are those persons who have been
properly instructed and educated on the dan-
gers which can arise from the units if they are
not used correctly and for the purpose for which
they are intended.
eN
Operating manual – Hepa Filter
B - 4