The descaling solution is to be disposed of
according to the manufacturer's instructions
and/or the regulations in force in the country of use.
13 "Intenza+" Filter (Optional)
The "INTENZA+" water filter can improve the quality of water.
Using the "INTENZA+" filter will prevent limescale from
building up and will ensure a much more intense aroma to
your espresso coffee. We therefore recommend you install the
"INTENZA+" water filter, which can be purchased from your
local dealer or on-line at the Philips on-line store http://shop.
philips.com or at authorized service centres.
•
34
Remove the small white filter from the tank and store
it in a dry place sheltered from dust.
32
•
Remove the "INTENZA+" water filter from its package.
Set the filter according to the water hardness.
33
•
Immerse the "INTENZA+" water filter vertically in cold
water (with the opening positioned upwards) and gently
press its sides to let the air bubbles out.
•
35
Put the filter into the empty tank. Press it until its limit
stop.
• Fill the water tank with fresh drinking water and reinsert it
into the machine.
Carry out the following steps to activate the "Intenza+"
filter:
4
•
Press the ON/OFF button (11): the "
(16) lights turn on while the "
ing. Wait until the "
5
•
Place a container or a tea glass under the steam wand
(Pannarello).
• Open the knob (3) by turning it clockwise.
6
•
When about 1 litre of hot water has been dispensed,
close the knob (3) by turning it counter-clockwise.
• Empty the hot water container.
During this operation the pump is automatically
disengaged and the (16) light is blinking: this is
a normal behaviour of the machine. Close the knob.
Wait until the (14) light is steady on before opening the
knob again.
Now the filter is active and the machine is ready for use.
4219-450-03711 MANUAL GAG. CAREZZA IT-EN-DE-FR-ES-PT.indd 25
" (12) and "
" light (14) starts blink-
" light (14) turns on steady.
"
ENGLISH
25
03/12/2018 11:32:22