About This Documentation; Documentation Validity; Required And Supplementary Documentation; Presentation Of Information - Emerson AVENTICS AES OPC-UA Mode D'emploi

1 About this documentation

1.1 Documentation validity

This documentation applies to the OPC-UA protocol for the following AES mod-
ules:
• R412088223, AES 2 bus coupler for PROFINET IO
• R412088222, AES 2 bus coupler for EtherNet/IP
This documentation is geared toward programmers, electrical engineers, service
personnel, and system owners.
This documentation contains important information on the safe and proper com-
missioning and operation of the product and how to remedy simple malfunctions
yourself.
The system description for bus couplers can be found on the CD
R412018133, included on delivery. Select the appropriate documenta-
tion based on your fieldbus protocol.

1.2 Required and supplementary documentation

Only commission the product once you have obtained the following docu-
u
mentation and understood and complied with its contents.
Table 1: Required and supplementary documentation
Documentation
System documentation
Documentation for PLC configuration tool
Assembly instructions for all current compo-
nents and the entire AV valve system
System descriptions for connecting the I/O
modules and bus couplers electrically
Documentation for the AV-EP pressure regu-
lators, R414007537
All assembly instructions and system descriptions for the AES and AV
series, as well as the PLC configuration files, can be found on the CD
R412018133.

1.3 Presentation of information

1.3.1 Warnings

In this documentation, there are warning notes before the steps whenever there
is a risk of personal injury or damage to equipment. The measures described to
avoid these hazards must be followed.
Structure of warnings
Hazard type and source
Consequences of non-observance
Precautions
u
Meaning of the signal words
Immediate danger to the life and health of persons.
Failure to observe these notices will result in serious health consequences, in-
cluding death.
Possible danger to the life and health of persons.
Failure to observe these notices can result in serious health consequences, in-
cluding death.
Possible dangerous situation.
Failure to observe these notices may result in minor injuries or damage to
property.
AVENTICS™ AES OPC-UA | R412028203-BAL-001-AA | English
Document type Comment
Operating instruc- To be created by sys-
tions tem owner
Software manual Included with soft-
ware
Assembly instructions Printed documenta-
tion
System description PDF file on CD
Operating instruc-
tions
SIGNAL WORD
DANGER
WARNING
CAUTION
Possibility of damage to property or malfunction.
Failure to observe these notices may result in damage to property or malfunc-
tions, but not in personal injury.

1.3.2 Symbols

Recommendation for the optimum use of our products.
Observe this information to ensure the smoothest possible operation.

1.4 Abbreviations

This documentation uses the following abbreviations:
Table 2: Abbreviations
Abbreviation Meaning
AES Advanced Electronic System
AV Advanced Valve
Bool Boolean (data type indicating the values "True" or "False")
Enum Enumeration (list)
EtherNet/IP EtherNet Industrial Protocol
INT Integer
JSON JavaScript Object Notation
PROFINET IO Process Field Network Input Output
PLC Programmable logic controller or PC, which assumes the control
functions
UA Actuator voltage (power supply for valves and outputs)
UINT Unsigned integer
UL Logic voltage (power supply for electronic components and sensors)

2 Safety instructions

2.1 About this chapter

The product has been manufactured according to the accepted rules of current
technology. Even so, there is danger of injury and damage to equipment if the
following chapter and safety instructions of this documentation are not followed.
1. Read these instructions completely before working with the product.
2. Keep this documentation in a location where it is accessible to all users at all
times.
3. Always include the documentation when you pass the product on to third par-
ties.

2.2 Intended use

The OPC-UA protocol described in this documentation is part of an electronic
component and was developed for use in industrial applications in the area of au-
tomation technology.
All AES modules are intended for professional use only and not for private use.
The modules may only be used for industrial applications (class A). An individual
license must be obtained from the authorities or an inspection center for systems
that are to be used in a residential area (residential, business, and commercial ar-
eas). In Germany, these individual licenses are issued by the Regulating Agency
for Telecommunications and Post (Regulierungsbehörde für Telekommunikation
und Post, Reg TP).
The OPC-UA connection in the AES module is designed to read data from the AES
module. It is not possible to control outputs or valves. Control of the outputs and
valves is reserved for the connected fieldbus. See

2.3 Improper use

Any use other than that described in the section "Intended use" is considered im-
proper and is not permitted.
The interface is designed to read data. It is not designed to control inputs or out-
puts.
NOTICE
g 4.2.1 Data description.
9