System Settings; Accessing The System Settings; Equalizer; Network - Sonoro ELITE SO-911 Mode D'emploi

17. System Settings

17.1

Accessing the system settings

Press SETUP in any playback mode and then select [System Settings].
•
Refer to the chapters below for details of each setting option.
•
The current settings (if applicable) are marked with an asterisk (*).
•
See chapter "Using the menus" for browsing and making selections in the
•
system settings.
17.2

Equalizer

Select one of the sound equalizer options including : [Loudness], [Bass],
•
[Treble], [Flat], [Pop], [Rock], [Jazz], [Classic].
17.3

Network

[Network wizard]
•
To establish network connection.
[WPS WLAN Setup]
•
Select this option if your wireless router supports both WPS and PBC setup
methods.
[View Settings]
•
To view the current network information.
[Manual Settings]
•
Under the [Wireless] option, select [DHCP enable] to allocate IP address
automatically or [DHCP disable] to do it manually.
[NetRemote PIN setup]
•
To set up a NetRemote PIN.
[Network Profile]
•
To display a list of networks saved by ELITE.
[Clear Network Setting]
•
To clear all network settings.
[Keep Network Connected]
•
To keep the WiFi network connected or not. If [YES] is selected, this allows
you to wake ELITE from standby using a remote app. If [NO] is selected, this
will switch OFF the WiFi network connection in standby mode.
98 © sonoro audio GmbH 2022