Validation Of The Configuration - SORHEA SOLARIS Notice D'installation

Barriere autonome a infrarouge actif
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SORHEA
Channel 1
Assignment of channels according to column availability having 5 cells maximum per barrier.
Channel 1
Channel 2
Assignment of channels according to column availability having 6 cells
5.3

Validation of the configuration

Channel 2
Channel 3
Channel 4
maximum per barrier.
1. Take out the "reset" jumper pin.
2. Wait a few seconds.
3. Replace the "reset" jumper pin.
4. Verify that the buzzer signal makes a short
"reset" jumper pin
- 41 -
Channel 3
Channel 2
Channel 1
beep.
(If the buzzer signal makes a long beep see
§11 Maintenance)
SOLARIS
Channel 4
Channel 4
Channel 3

Publicité

Table des Matières
loading

Table des Matières