Power Adaptor Operation - Petsafe PFD19-15521 Mode D'emploi

side of bowl holder from the outside. Release other tab and pull down other side
of bowl holder.
9. The stainless steel bowl, bowl holder, hopper lid and hopper are dishwasher safe.
The conveyor must only be washed by hand. Submerge conveyor and crumb
catcher in cool or warm soapy water and hand-wash. Use a cleaning brush or
toothbrush to clean food debris and residue from conveyor belt. Rinse and let air
dry completely. Stand conveyor upright with front chute on flat surface for best
drying results.
10. Make sure all parts are completely dry. Reinstall crumb catcher on conveyor.
Reassemble pet feeder ensuring conveyor is aligned and installed correctly (see
"Assemble Pet Feeder" section).
1 1. After reassembling, make sure to cancel PAUSE FEED MODE (see "Pause
Feed Mode" section).
12. After refilling with food, make sure to push ENTER and LEFT buttons
AT SAME TIME to prepare pet feeder conveyor to dispense food. You should
hear the conveyor moving and filling each section with food getting ready for the
first scheduled meal.

Power Adaptor Operation

The Healthy Pet Simply
Feed is battery
™
operated, but has
a power adaptor
connection located
on the back of the pet
feeder (power adaptor
sold separately). If the
power adaptor is used
to operate the pet feeder, the batteries function as a back-up power source in case of
a power cut. When power adaptor is being used as power source, the power adaptor
icon will appear at the top of the LCD screen.
22 www.petsafe.net