Tools Required; Measurement And Marking - Petsafe Staywell Pet Door Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
Before installing this dog door please
read the following step-by-step instructions
carefully. Please note that this product
is not designed to fi t into glass.

Tools required

Pencil
Ruler
Jig or Keyhole Saw
Drill
Screwdriver
Tape measure
Sand paper

Measurement and marking

Measure the belly height of your dog. (Fig. 1).
Mark this measurement and draw a straight horizontal line measuring
291mm (11
1
/
") (Fig. 2). Ensure line height is suffi cient to avoid weakening
2
the base of the door.
Please bear in mind that this line will eventually be the bottom of the hole
you will cut in your door and that the frame of the dog door will be slightly
lower. If necessary, this line may have to be raised slightly to account for this.
2
FIG.1
(X)
Cutting a hole for your dog door
a) In Wood and PVC/uPVC/Metal
The dog door requires a square cut-out of 429mm x 291mm (16
FIG.3
291mm (11
/
")
1
2
Not to scale - for best results you should refer
to the enclosed cutting template.
FIG.2
Wooden doors
7
/
" x 11
1
/
"). (Fig. 3).
8
2
429mm
(16
7
/
")
8
PVC/uPVC/Metal

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

800 série

Table des Matières