Optional Temperature Limiting Adjustment - Kohler K-14418 Guide D'installation

3. Optional Temperature Limiting Adjustment

CAUTION: Risk of personal injury. The water temperature
should never be set above 120°F (49°C).
Turn the valve clockwise to the full open position and let the hot
water run for several minutes. Position a thermometer in the
water stream and check the temperature.
For minor water temperature changes, adjust the setscrew, and
recheck the water temperature.
For major water temperature changes, remove the O-ring and
collar from the valve stem. Slowly rotate the valve stem until the
desired maximum water temperature is reached.
Reinstall the collar on the valve stem with the setscrew against
the side of the tab.
Reinstall the O-ring, rotate the valve stem counterclockwise to
shut the water off.
Recheck the water temperature.
Complete the information on the valve label (if supplied).
1031692-2-D
All manuals and user guides at all-guides.com
High Flow
Valve
Setscrew
Tab
Collar
Setscrew
Standard
Valve
Tab
Collar
Valve
Label
Valve
Stem
O-Ring
6 Kohler Co.