Frequency Response And Accuracy Curves; Repair - Amprobe CT235A Mode D'emploi

3. Lift the cover through 30° and pull it clear of the probe body as shown in
Fig 1. The battery is then accessible.
4. Replace the battery and re-fit the battery cover and fasten the screw.
5. Replacement with other than the specified type of battery will invalidate
the warranty. Fit only Type 9 V PP3, Alkaline (MN 1604).

Frequency Response and Accuracy Curves

Refer to Fig. 2.

Repair

All test tools returned for warranty or non-warranty repair or for calibration
should be accompanied by the following: your name, company's name, address,
telephone number, and proof of purchase. Additionally, please include a
brief description of the problem or the service requested and include the test
leads with the meter. Non-warranty repair or replacement charges should be
remitted in the form of a check, a money order, credit card with expiration
date, or a purchase order made payable to Amprobe® Test Tools.
In-Warranty Repairs and Replacement – All Countries
Please read the warranty statement and check your battery before requesting
repair. During the warranty period any defective test tool can be returned to
your Amprobe® Test Tools distributor for an exchange for the same or like
product. Please check the "Where to Buy" section on www.amprobe.com for
a list of distributors near you. Additionally, in the United States and Canada
In-Warranty repair and replacement units can also be sent to a Amprobe® Test
Tools Service Center (see address below).
Non-Warranty Repairs and Replacement – US and Canada
Non-warranty repairs in the United States and Canada should be sent to a
Amprobe® Test Tools Service Center. Call Amprobe® Test Tools or inquire at
your point of purchase for current repair and replacement rates.
In USA
Amprobe Test Tools
Everett, WA 98203
Tel: 877-AMPROBE (267-7623)
Non-Warranty Repairs and Replacement – Europe
European non-warranty units can be replaced by your Amprobe® Test Tools
distributor for a nominal charge. Please check the "Where to Buy" section on
www.amprobe.com for a list of distributors near you.
European Correspondence Address*
Amprobe® Test Tools Europe
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
*(Correspondence only – no repair or replacement available from this address.
European customers please contact your distributor.)
In Canada
Amprobe Test Tools
Mississauga, ON L4Z 1X9
Tel: 905-890-7600
4