Turntable
PROBLEM
The turntable will
not turn.
Tones
PROBLEM
You do not hear the
programming or
end-of-cycle tone.
If none of these items are causing your problem, see "Requesting Assistance or Service."
Troubleshooting
CAUSE
You have turned off the turntable. (See the "Using 2-4 Plates" section on
•
Page 30.)
The turntable is not correctly in place. It should be correct-side up and sitting
•
firmly on the center shaft.
The support is not operating correctly. Remove the turntable and restart the
•
oven. If the support still does not move, call a designated service technician
for repair. Cooking without the turntable can give you poor results.
CAUSE
You have turned off the tone. (See the "Audible signals" section on Page 10.)
•
35